Sony VIDEO Plus SLV-SE30UX Operating Instructions Manual page 15

3
Tune the TV to the same channel as that
shown in the display window so that
the picture on the right appears clearly
on the TV screen.
Refer to your TV manual for tuning
instructions.
If the picture does not appear clearly,
see "To obtain a clear picture from the
VCR" below.
4
Press RF CHANNEL.
You have now tuned your TV to the VCR. Whenever you want to
RF CHANNEL
play a tape, set the TV to the video channel.
To check to see if the TV tuning is correct
Set the TV to the video channel and press PROGRAM +/– on the VCR. If the
TV screen changes to a different programme each time you press
PROGRAM +/–, the TV tuning is correct.
To obtain a clear picture from the VCR
If the screen does not appear clearly in step 3 above, press PROGRAM +/–,
so that another RF channel appears. Then tune the TV to the new RF channel
until a clear picture appears.
SONY VIDEO CASSETTE RECORDER
Getting Started
15