Sony VIDEO Plus SLV-SE30UX Operating Instructions Manual page 46

Recording TV programmes using the VIDEO Plus+ system
(continued)
Tips
• To set the programme position with a two digit number, press ? (ten's digit)
button followed by the programme number button.
• To set the programme position, you can also use the PROG +/– or programme
number buttons.
• To set the tape speed, you can also use the SP/LP button.
• When you are recording a programme in the SP mode and the remaining tape
becomes shorter than the recording time, the tape speed is automatically changed to
the LP mode. Note that some interference will appear on the picture at the point the
tape speed is changed. If you want to keep the same tape speed, set AUTO LONG
PLAY to OFF in the OPTIONS-1 menu (page 63).
• To check, change, or clear the programme setting, press ?// to choose LIST, then
press OK after step 4. For details, see step 3 in "Checking/changing/cancelling
timer settings" (page 54).
Notes
• If the VPS/PDC signal is too weak or the broadcasting station failed to transmit
VPS/PDC signals, the VCR will start recording at the set time without using the
VPS/PDC function.
• The
inserted.
• When you set TIMER OPTIONS to STANDARD in the OPTIONS-2 menu, the
VIDEO PLUS+ menu does not appear on the TV screen. Select VIDEO PLUS+ or
VARIABLE.
46
Basic Operations
indicator flashes in the display window when you press I/u with no tape