Table of Contents
Advertisement
FIGURE 3-2. AUTOMATIC LUBRICATION SYSTEM INSTALLATION
NOTE: The above illustration shows the standard location for the lube pump and reservoir
(right platform). This assembly may be located on the left platform on some models.
1. L.H. Suspension, Bottom Bearing
2. L.H. Hoist Cylinder, Top Bearing
3. L.H. Hoist Cylinder, Bottom Bearing
4. L.H. Anti-Sway Bar Bearing
5. L.H. Suspension, Top Bearing
6. L.H. Body Pivot Pin
7. R.H. Body Pivot Pin
8. Grease Supply From Pump
9. R.H. Suspension, Bottom Bearing
10. R.H. Hoist Cylinder, Top Bearing
11. R.H. Hoist Cylinder, Bottom Bearing
12. Rear Axle Pivot Pin
P3-4
13. R.H. Anti-Sway Bar Bearing
14. R.H. Suspension, Top Bearing
15. Truck Frame
16. Vent Hose
17. Pipe Plug (Oil Level)
18. Pressure Switch, N.O., 17 237 kPa (2500 psi)
19. Grease Pump
20. Vent Valve
21. Filter
22. Grease Supply to Injectors
23. Injectors
24. Pressure Switch, N.O., 13 790 kPa (2000 psi)
Automatic Lubrication System
P03030
Advertisement
Chapters
Table of Contents
