Table of Contents
Advertisement
Truck Serial Number______________________
Hourmeter_____________
7. COOLING AIR DUCTWORK - Inspect ductwork from
the blower to the rear drive case. Ensure that duct-
work is secure, free of damage, and unrestricted.
8. AIR INTAKE PIPING - Check all mounting hardware,
joints, and connections. Ensure no air leaks exist and
all hardware is properly tightened. Figure 2-2.
9. AIR CLEANERS - Check the air cleaner vacuum
gauges in the operator cab, Figure 2-3. The air
cleaner(s) must be serviced if the gauge(s) shows the
following maximum restriction:
Komatsu SDA16V160 or SSDA16V160 Engines:
. . . . . . . . . . . . . . . . . . . . . . . . 25 in. of H
Refer to Section C in the shop manual for servicing
instructions for the air cleaner elements. Empty the air
cleaner dust caps.
NOTE: After service, push the reset button on face of
gauge to allow the gauge to return to zero.
10. CAB AIR FILTER - Under normal operating condi-
tions, clean every 250 hours. In extremely dusty con-
ditions, service as frequently as required. Clean the
filter element with mild soap and water. Rinse com-
pletely clean and air dry with a maximum of 275 kPa
(40 psi). Reinstall the filter. Refer to Figure 2-4.
FIGURE 2-2.
P02050 10/06
10 HOUR (DAILY) INSPECTION (Continued)
Site Unit Number_______________
Name of Service Technician___________________________________
TASK
O vacuum.
2
FIGURE 2-3.
Lubrication and Service
Date_______________
COMMENTS
CHECKED INITIALS
FIGURE 2-4.
1. Filter Cover
2. Cab Filter
P2-7
Advertisement
Chapters
Table of Contents
