Sony SLV-SE70NP1, SLV-SE70NP2, SLV-SE70VC1, SLV-SE70VC2, SLV-SX70VC Operating Instructions Manual page 74

Sony operating instructions video cassette recorder slv-se70np1/np2/vc1/vc2, slv-sx70vc
Table of Contents

Advertisement

Editing with another VCR (continued)
Operation
(when recording on this VCR)
Before you start editing
• Turn on your TV and set it to the
video channel.
• Press INPUT SELECT to display "L2"
(or "L1") in the display window.
• Press SP/LP to select the tape speed, SP or LP.
• On this VCR, set EDIT to ON in the OPTIONS-1 menu. If the other
VCR has a similar function, turn it on also.
1
Insert a source tape with its safety tab removed into the other
(playback) VCR. Search for the point to start playback and set it to
playback pause.
2
Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press P PAUSE.
3
Press r REC on this VCR to set it to recording pause.
4
To start editing, press the P PAUSE buttons on both VCRs at the same
time.
To stop editing
Press the p STOP buttons on both VCRs.
Tip
• To cut out unwanted scenes while editing, press P PAUSE on this VCR when an
unwanted scene begins. When it ends, press P PAUSE again to resume recording.
Note
• If you start editing following the procedure above, the VCR won't start recording
with the OPC function. To record a tape with the OPC function, press r REC again
during recording pause in step 3 so the VCR analyses the tape. Then, when you
start editing in step 4, press P PAUSE after the OPC indicator stops flashing. If you
press P PAUSE before the OPC indicator stops flashing, the OPC function is
cancelled.
74
Additional Operations
r REC
P PAUSE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Slv-sx70vcSlv-se70np2Slv-se70vc1Slv-se70vc2

Table of Contents