Sony SLV-SE70NP1, SLV-SE70NP2, SLV-SE70VC1, SLV-SE70VC2, SLV-SX70VC Operating Instructions Manual page 11

3
Connect LINE-1 (TV) on the VCR and
the EURO-AV (Scart) connector on the
TV with the optional EURO-AV cable.
This connection improves picture and
sound quality. Whenever you want to
watch the VCR picture, press
... TV/VIDEO to display the VIDEO
indicator in the display window.
4
Connect the mains lead to the mains.
Note
• If the TV is connected to the LINE-1 (TV) connector, setting the RF MODULATOR in
the OPTIONS-2 menu to OFF is recommended. In the OFF position, only the signal
from the aerial is output through the AERIAL OUT connector (see page 72). You do
not have to tune your TV to the VCR. Skip "Tuning your TV to the VCR" on page
14.
About the SMARTLINK features
If the connected TV complies with
SMARTLINK, MEGALOGIC*
Q-Link* 3 , or EURO VIEW LINK*
the SMARTLINK function after you complete
the steps on the previous page (the SMARTLINK indicator appears in the VCR's
display window when you turn on the TV). You can enjoy the following
SMARTLINK features.
• Preset Download
You can download your TV tuner preset data to this VCR and tune the VCR
according to that data in Auto Set Up. This greatly simplifies the Auto Set Up
procedure. Be careful, not to disconnect the cables or exit the Auto Set Up function
during the procedure.
See "Setting up the VCR with the Auto Set Up function" on page 16.
1 2
, EASYLINK* ,
4 , you can use
SMARTLINK
continued
11
Getting Started