Step 3 : Connecting The Vcr - Sony SLV-SE240D Operating Instructions Manual

Step 3 : Connecting the VCR

If your TV has a Scart (EURO-AV) connector, see page 17.
If your TV does not have a Scart (EURO-AV) connector
: Signal flow
1
2
3
Note
• When you connect the VCR and your TV only with an aerial cable, you have to
tune your TV to the VCR (see page 20).
16
Connecting the VCR
AERIAL IN
Aerial cable (supplied)
Disconnect the aerial cable from your
TV and connect it to
panel of the VCR.
Connect of the VCR and the aerial
input of your TV using the supplied
aerial cable.
Connect the mains lead to the mains.
on the rear
Mains lead
to mains