Sony SLV-N700 Operating Instructions Manual page 50

To search for the counter 0:00:00 point
To mark a point on the tape that you want to find later, reset the tape counter to
"0:00:00."
The VCR automatically fast-forwards or rewinds to the 0:00:00 point on the tape
counter.
1
Press SEARCH.
2
Press M.
The VCR starts searching and automatically stops at
the 0:00:00 point.
To search for a blank portion of the tape
The VCR automatically searches for the beginning of a blank portion. You can easily
find a point you can start recording from.
1
Press SEARCH.
2
Press m.
The VCR starts searching and automatically stops at
the beginning of a blank space. If no blank space is
found, the VCR reaches the end and the tape will
stop.
Note
• Once in recording mode, if the VCR is put in pause and then released to start the recording,
no index mark will be inserted. An index mark will be inserted if the channel is changed
while VCR is put in pause.
50
Searching using various functions
Go to [ ]
0 0 0 : : 0 0
0 0 1 3 0 SP : :
End search
0 0 1 3 0 SP : :