Sony SLV-N700 Operating Instructions Manual page 29

3 Press M/m to move the cursor (B) to "Guide
channel setup," then press OK.
PLAY
OK
4
The upper row shows VCR Plus+ guide channels and the lower row shows
TV channels or cable box out put channels. Press </, to select the
PLAY
channel number that does not match the guide channel.
OK
5
• If you made Hookup 1 or 2: Enter the actual number on your TV (and
PLAY
• If you made Hookup 3: Enter the cable box output channel (usually 2, 3,
OK
6
Repeat steps 4 and 5 for each channel number that does not match.
7
Press OK to confirm the setting.
PLAY
OK
8
Press MENU to exit the menu.
MENU
VCR), then press M/m.
or 4), then press M/m.
Setting up the VCR Plus+® system (SLV-N700 only)
GUIDE CHANNEL SETUP
[GUIDE CH]
v
[TV CH]
Enter actual
receiving channel
Bb Vv
Select : Set :
End : OK Quit : MENU
29