Sony SLV-N700 Operating Instructions Manual page 12

Hookup 1 (Plug and Play)
Antenna hookup
Make the following connections if you are using an antenna (if you do not have cable
TV).
A Use this hookup if you are using:
• VHF/UHF antenna (you get channels 2–13 and channels 14 and higher)
• UHF-only antenna (you get channels 14 and higher)
• Separate VHF and UHF antennas
VCR
B Use this hookup if you are using a VHF-only antenna (you get
channels 2–13 only)
VCR
If you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so you can connect the cable to the RF IN
connector. If you have separate cables for VHF and UHF antennas, you should use a
U/V band mixer (not supplied) (page 56).
12
Hookups
IN
OUT
IN
OUT
Rear of TV
VHF/UHF
Match the type of
A
connector on your
or
TV: A, B, or C.
VHF
B
UHF
or
VHF
C
UHF
Rear of TV
VHF/UHF
A Match the type of
connector on your
or
TV: A, B, or C.
VHF
B For connector types
B and C, no UHF
UHF
connection is
or
required.
VHF
C
UHF