IN S TA L L AT I O N
Hood Preparation
Remove the filters prior to installation. Remove the center
filter first, if applicable. To remove, press the filter upward,
then rotate the bottom downward. Refer to the illustration
below.
Filters
6 | Wolf Customer Care 800.222.7820
Installation
WARNING
Wall framing must be able to support the weight of the
hood and internal blower, if applicable.
Refer to the illustration below for typical wall framing.
1
BLOCKING
5"
(127)
BACK PANEL
Wall framing (typical)
MOUNTING
HOLE
3 /4
10
"
(273)
C L
MOUNTING
HOLE