Table of Contents
Advertisement
4
Press M/m to select the appropriate
TV system, then press OK.
PLAY
OK
The VCR starts searching for all of
the receivable channels and presets
them (in the appropriate order for
your local area).
If you want to disable unwanted
programme positions, see
"Disabling unwanted programme
positions" on page 14.
After the search is complete, the clock setting menu appears. See
"Setting the clock" on page 10.
To cancel the Auto Set Up function
Press MENU.
Notes
• Whenever you operate the Auto Set Up function, some of the settings (timer, etc.)
will be reset. If this happens, you have to set them again.
• Auto preset starts automatically only when you plug in the mains lead for the first
time after you purchase the VCR.
• After using the Auto Set Up function, the LANGUAGE SET menu does not
appear automatically when you connect the mains lead again. If you want to use
the Auto Set Up function again, press MENU, then press M/m/</, to highlight
INSTALLATION and press OK. Press M/m to highlight AUTO SET UP, then
repeat all procedures from step 3.
• Auto preset can be performed by pressing x STOP on the VCR continuously for
5 seconds or more with no tape inserted.
A U T O S E T U P
P L E A S E W A I T
4 0 %
E X I T
:
M E N U
9
Advertisement
Table of Contents
