Searching Using The Index Function - Sony SLV-ED70MN Operating Instructions Manual

Searching using
the index
function
The VCR marks the tape with an index
signal at the point where each recording
begins. Use these signals as references
to find a specific recording. The VCR
can search up to 99 index signals ahead
of or behind the current position.
1
Insert an indexed tape into the VCR.
2
Press =/+ INDEX SEARCH repeatedly to specify how many
index signals ahead or behind you want to search:
• To search ahead, press + INDEX
• To search backwards, press =INDEX
The VCR starts searching and the index
number on the TV screen counts down to
zero. The playback starts from the point
about five seconds ahead of the specified
index mark.
To stop searching
Press p STOP.
Note
• No index signal will be added when recording starts from recording pause.
However, an index signal will be marked if you change the channel during
recording pause.
42
Additional Operations
5/33-44_SLV-ED70MN.12E
SEARCH.
SEARCH.
42
=/+
INDEX
SEARCH
INDEX 8
SEARCH
1/17/01, 2:31 PM