Table of Contents
Advertisement
Setting the timer manually (continued)
3
PLAY
OK
4
PLAY
OK
5
• ON/
STANDBY
To stop recording
To stop the VCR while recording, press p STOP.
Daily/weekly recording
In step 2 above, press . to select the recording pattern. Each time you press
., the indication changes as shown below. Press > to change the indication
in reverse order.
the current date n SU-SA (Sunday to Saturday) n MO-SA (Monday to
Saturday) n MO-FR (Monday to Friday) n EVERY SA ..... n EVERY MO n
EVERY SU n 1 month later n (dates count down) n the current date
Tips
• To set the programme position, you can also use the PROG +/– or programme
number buttons.
• To set the tape speed, you can also use SP/LP (SP/EP).
• To record NTSC signals, set the tape speed to SP or EP. To set to the EP mode,
display "LP" in the tape speed position.
Note
t
The
no tape inserted.
32
Basic Operations
4/19-32_SLV-ED70MN.12E
To record the same programme every day or the same day every
week, press . while the date is flashing. For details, see "Daily/
weekly recording" below.
To record from a source connected to the LINE-1 IN, LINE-2 IN or
LINE-3 IN (SAT IN) jacks; press INPUT SELECT or PROG +/– to
display "L1", "L2" or "L3" in the "PROG" position.
Press / to confirm the setting.
The cursor (") appears at the beginning of the line. To enter
another setting, move the cursor to the next line and repeat step 2.
Press OK.
Press ON/STANDBY to turn off the VCR.
The t indicator appears in the display window and the VCR
stands by for recording.
To record from other equipment, leave the connected equipment
switched on.
indicator flashes in the display window when you press ON/STANDBY with
32
1/17/01, 2:30 PM
Advertisement
Table of Contents
