Replacing Motor Brushes - Grizzly G0885 Owner's Manual

Replacing Motor
Brushes
The motor brushes wear with use. When they
require replacement, the motor will stop operat-
ing correctly, fail to start, or cut in and out during
operation. Always replace both brushes at the
same time.
Item(s) Needed
Flat Head Screwdriver ....................................... 1
Phillips Head Screwdriver #1 ............................. 1
Phillips Head Screwdriver #2 ............................ 1
To inspect/replace motor brushes:
1. DISCONNECT MACHINE FROM POWER!
2. Take off motor cover by removing 5 screws
(see Figure 30).
Figure 30. Removing motor cover.
Model G0885 (Mfd. Since 04/19)
Qty
x 2
x 3
3. Remove upper and lower motor brush caps
and motor brushes, as shown in Figure 31.
Brush Location (1 of 2)
Motor Brush
Figure 31. Motor brush cap location.
4. Replace brushes (2) and re-install brush
caps.
5. Re-attach motor cover and secure with
screws.
Motor Brush
Cap
-27-