Sony SLV-ED225PS Operating Instructions Manual page 40

Recording TV programmes using the Easy Timer (continued)
To set the clock
1
Hold down EASY TIMER so that "DAY" appears in the display
window. However, if the clock has already been set, the current setting
appears.
2
Turn EASY TIMER to set the day.
3
Press EASY TIMER.
MONTH indicator and "1" appear in the display window.
4
Turn and press EASY TIMER to set the month, and then the year.
After you set the year, "CLOCK" appears in the display window.
5
Turn and press EASY TIMER to set the hour and minute.
6
When you have finished setting the time, press EASY TIMER to start
the clock.
Tips
• To cancel a Easy Timer setting, press x STOP on the VCR while you are making
the setting.
• To check, change, or cancel the programme setting, see "Checking/changing/
cancelling timer settings" on page 50.
• To record NTSC signals in EP mode, set the tape speed to LP. Even when timer
recording is set to LP mode, NTSC signals are automatically recorded in EP
mode.
Notes
• If eight programmes have already been set using the G-CODE system* or the
TIMER PROGRAMMING menu, "FULL" appears in the display window for
about five seconds.
• The
step 11 with no tape inserted.
• When the time is set incorrectly, "ERROR" appears in the display window in step
11. Set the timer again from step 1.
40 Basic Operations
indicator flashes in the display window when you complete the setting in