Table of Contents
Advertisement
Controlling a Sony TV with the
remote
You can use this remote to operate your Sony TV.
Use the buttons marked with an orange dot (•).
Number
buttons,
SET
Slide the TV/DVD·VIDEO switch to TV.
The remote performs the following:
Press
"/1
VOL +/–
CH +/–
TV/VIDEO
Number buttons and
SET
WIDE MODE
Note
Depending on the connected unit, you may not be able to
control your TV with some or any of the buttons.
20
TV/DVD·VIDEO
switch
"/1
CH +/–
VOL +/–
TV/VIDEO
WIDE MODE
To
Turn your TV on or off
Adjust the volume of your
TV
Select the channel on your
TV
Switch your TV's input
source
Select the channel on your
TV
Switch to or from the wide
mode of your wide-screen
TV
Controlling the volume of a Sony AV
amplifier (receiver) with the remote
If you connect the recorder to a Sony AV amplifier
(receiver), you can use the supplied remote to
control the AV amplifier's (receiver's) volume.
Set the code number for your AV amplifier
(receiver) to control it.
Number
buttons
1
Slide the TV/DVD·VIDEO switch to
DVD·VIDEO.
2
Hold down "/1 and enter 78, 79, 80, or 91
using the number buttons.
3
Release "/1.
The VOL +/– buttons control the AV
amplifier's volume. If the buttons do not
work, try the other numbers one at a time.
If you want to control the TV's volume, slide
the TV/DVD·VIDEO switch to TV.
z Hint
If you want to control the TV's volume even when the
TV/DVD·VIDEO switch is set to DVD·VIDEO, repeat
the steps above and enter the code number 90 (default).
TV/DVD·VIDEO
switch
"/1
VOL +/–
Hide quick links:
Advertisement
Table of Contents
