Specifications - Hach Sigma 1600 Instrument Manual

Specifications

Sampler/Refrigerator Cabinet Fiberglass reinforced plastic.
Cabinet Hardware
Sample Chamber
Pipe Connections
Refrigerator Compartment
Refrigerator Insulation
Refrigerator
Dipper Arm
Dipper Drive Motor
Sample Volume
Flow Proportional
Interval Between Samples
LED Display
Sample Program Delay
Automatic Shut-Off
Timer/Controller
Chassis
Electronics Enclosure
Sample Containers
Outside Dimensions
Weight
Power
Operating Instructions
Certifications
Page 8
Specifications
Specifications are subject to change without notice.
Stainless Steel.
Fiberglass reinforced plastic, 5–30 gpm capacity with adjustable plastic weir.
Inlet—2 in. diameter 80 SCH 80 PVC socket coupling.
Outlet—3 in. diameter SCH 80 PVC socket coupling (flanged connections optional).
21 in. H x 15 in. W x 15 in. D
Rigid polyurethane foam; 1 in. thick.
1
/ horsepower compressor with fan-cooled epoxy coated condenser. Thermostatically
6
controlled temperature, 4–10 °C. Output—1350 BTU/hr. Refrigerant—R-414B.
All plastic construction, 25 mL per cycle with 5 in. water depth in flow through chamber,
cam operated.
Permanent magnet, high torque dc, totally enclosed.
Adjustable 1–99 cycles per sample using 2-digit thumbwheel switch.
1–9999 contact closures.
Timed-Cycle Mode—Sample interval adjustable from 1–9999 minutes.
Flow Proportional Mode—Sample interval adjustable from 1–9999 contact closures.
With 4–20 mA (optional), sample interval is set from 1–9999 minutes at 100% flow rate.
4-digit display indicates number of minutes or contact closures remaining until the
next sample.
Start of sampling program may be delayed 1–9999 minutes.
Sampler operation terminated after adjustable preselected number of samplers have
been taken.
Solid state quartz crystal time base clock. Adjustable from 1–600 sample cycles per hour.
Solid State—circuit boards and board components are treated with 3 mm thick
corrosion/moisture resistant polyurethane coating.
Fiberglass reinforced plastic, fully gasketed and moisture proof with clear front cover.
3 gal polyethylene with lid (2½ gal glass container, 24–475 mL polyethylene bottles optional)
52 in. H x 19 in. W x 22 in. D
115 lb
120 V ac, 60 Hz, 4.8 amps.
Located on front panel overlay.
This product has no 3rd party safety certifications to UL or CSA safety standards (3rd party
on-site certifications of the product may be required)
6507spec.fm