Copying The Settings Of A Component Select Button To Another Button - Sony RM-VL900 Operating Instructions (primary manual) Operating Instructions Manual

Assigning Other Components to
the Component Select Buttons
(continued)
Copying the settings of a
Component Select button
to another button
You can copy the entire settings of
a Component Select button to
another Component Select button.
The settings of the component
code (page 8), the Channel Macro
function (page 43), and the
"learned" function (page 15) are
copied to a new button.
Note
You cannot copy the settings to a
Component Select button on which any
"learned" function or Channel Macro
function has been programmed.
Example: To copy the settings of
the CD button to the VCR
button
1
Press S (set).
All Component Select buttons
flash.
34
2
Press and hold for over 3
seconds the desired
Component Select button to
which you want to copy a
setting from another
component.
The selected Component
button lights up, and all other
buttons flash rapidly.
3
Keep holding down this
Component button, and
press the Component
button that holds the
setting you want to copy.
Both Component buttons light
up when you press them, and
turn off when you release
them.
At this point, all settings for
CD are imported to VCR.