Copying The Settings Of A Component Select Button To Another Button - Sony RM-VL1400T Operating Instructions Manual

Copying the settings
of a COMPONENT
select button to
another button
You can copy the entire settings of a
COMPONENT select button or Label
select button to another COMPONENT
select button or Label select button.
Notes
• You cannot copy the settings to a
COMPONENT select button or Label select
button on which any "learned" function (page
12) or Component Macro (page 18) has been
programmed or A/V component's name or
label has been changed. (A beep sounds five
times and "NG" appears on the screen.)
• Characters displayed when using the button
will be also replaced.
Example: To copy the
settings on the TV button to
the MD button
1
While pressing the
button, press the OTHER
button.
"SET MODE" appears as the screen
title.
2
Press the V/v buttons to
select "6 UTILITY", then
press the OK button or the
centre Label select button.
"UTILITY" appears as the screen
title.
Tip
If a number is displayed before the menu,
you can select the menu by pressing the
number button.
GB
22
3
4
5
(light)
6
To reset the settings
Follow the procedure in "Resetting a
COMPONENT select button or Label select
button" on page 28.
Press the V/v buttons to select
"2 COPY", then press the OK
button or centre Label select
button.
"COPY" appears as the screen title.
Tip
If a number is displayed before the menu,
you can select the menu by pressing the
number button.
Press the TV button.
"TV" appears in the second line of the
screen.
Press the OTHER button
repeatedly, then press the
centre Label select button
(MD).
A beep sounds and "TV >> MD"
appears in the second line of the
screen.
Press the (light) button or
the RETURN button three
times.
The set mode closes, and the Remote
Commander returns to standby for
operating the A/V components.