Advanced Features; Controlling The Volume Of Visual Components Connected To An Audio System - Sony RM-VL1000 Operating Instructions Manual

Advanced Features

Controlling the
Volume of Visual
Components
Connected to an
Audio System
The Commander is factory preset
based on the assumption that you
hear the sound of your visual
components from your TV
speakers, and that you hear sound
of your audio components from
the loudspeakers connected to
your amplifier.
This feature enables you to control
the volume of your TV or
amplifier without having to select
TV or AMP each time you want to
control the volume.
For example, to control the
volume while using a VCR, you
don't need to press the TV button
to control the TV volume.
You can switch the volume of all
the visual components to the
amplifier at the same time.
The following table shows the
factory setting of which volume
would be controlled for each
component.
Component Controls the volume
name on the of
display
TV TV
VCR1 TV
VCR2 TV
CABLE TV
SAT TV
DVR TV
DVD TV
CD amplifier
AMP amplifier
MD/DAT amplifier
TAPE A amplifier
TAPE B amplifier
30
However, if your visual
components are connected to an
audio system, you probably hear
TV or VCR sound from the
loudspeakers via your amplifier,
not from your TV speakers. In this
case, you need to change the
factory preset so that you can
control the volume of your visual
components without first having
to switch to the amplifier.
To change the Factory Preset of
the Volume Control
COMPO
SYSTEM
TIMER
SCROLL
SET
REC
VIDEO1 VIDEO2
TUNER CD
MD TV
DVD
MENU
VOL
MUTING RECALL
2
5,7
4
POWER 3,6
1,8
AUX
TAPE
PHONO
GUIDE
CH