Advanced Features; Controlling The Volume Of Visual Components Connected To An Audio System - Sony RM-AV3100 Operating Instructions Manual

Advanced Features

Controlling the Volume
of Visual Components
Connected to an Audio
System
The Commander is factory preset based
on the assumption that you hear the
sound of your visual components from
your TV speakers, and that you hear
sound of your audio components from
the loudspeakers connected to your
amplifier.
This feature enables you to control the
volume of your TV or amplifier without
having to select TV or AMP each time
you want to control the volume.
For example, to control the volume while
using a VCR, you do not need to press
the TV button to control the TV volume.
You can switch the volume of all the
visual components to the amplifier at the
same time.
The following table shows the factory
setting of which volume would be
controlled for each component.
Component
Select button
TV
STB
VCR
DVD
CD
AMP
30
Controls the volume of
TV
TV
TV
TV
amplifier
amplifier
Label key Controls the volume of
MD amplifier
TAPE A amplifier
TAPE B amplifier
CABLE TV
VCR2 TV
VCR3 TV
STB2 TV
DVR TV
DVD2 TV
MULTI TV
DAT amplifier
LIGHTING ––––––––
However, if your visual components are
connected to an audio system, you
probably hear TV or VCR sound from the
loudspeakers via your amplifier, not
from your TV speakers. In this case, you
need to change the factory preset so that
you can control the volume of your
visual components without first having
to switch to the amplifier.
To change the Factory Preset of
the Volume Control
3
TV STB VCR DVD
SYSTEM CONTROL
1 2 3
OK
MENU EXIT
2
SET
4
5
CD AMP OTHER
6
COMMANDER
TIMER LIGHT OFF
1
MORE
VOLUME CHANNEL
MUTING RECALL