To Clear The Contents Programmed For A Specific Component Label - Sony RM-VL1000T Operating Instructions Manual

Note
To search for component code
numbers in another category, return
to Step 3, or input a four-digit
component code number of another
category (for example, a code
number which begins with "3", "4",
etc.) before Step 4.
5
Aim the Commander at the
component and press the 1
button.
When the remote control signal
is sent, is shown on the
display.
COMPO
SET
PRESET
If it works (power-off for TV,
AMP, playback for CD, MD,
DAT, TAPE, and power-on for
other components), go to Step
6.
If it does not, repeat Steps 4 to
5.
6
Press the ENT button.
With a beep sound, "OK" and
input digits are displayed.
The component code number is
decided and the display returns
to the presetting mode.
If you press the SET button
The display returns to the setting
mode.
If you press the SET button
again
The display for component
operation appears.
Note
It is recommended to write down
the code number.
To clear the contents
programmed for a specific
component label
You can clear all data you have set
(preset data, learned contents, channel
macro, character contents of the labels,
programmed data of system macro for
the component label).
1
Keep the SET button
pressed for more than a
second.
"SET" appears on the LCD
display.
2
Press the SCROLL button
twice to display "CLEAR"
on one of the labels.
Each time the SCROLL button is
pressed, the label changes as
follows.
PRESET
LEARN
LABEL
CLOCK
SYSTEM
TIMER
CH MACRO
VOLUME
POWER ON
COPY
CLEAR
SYSDELAY
Continued
19