Table of Contents
Advertisement
To control the volume
Press the VOL 2 +/– buttons to
control the volume, and the %
button to mute. When you select a
visual component, the TV's
volume will be controlled, and
when you select an audio
component, the amplifier's
volume will be controlled. You can
change this setting also (page 30).
Notes
• If you have programmed any signal
for the 2 or % button for any
component using the learning
function, that signal will be
transmitted instead of controlling the
volume of the TV or amplifier.
• If you have programmed any signal
for the 2 or % button of TV or AMP
using the learning function, that
signal will be also transmitted when
you select another component.
However, if you have programmed
any signal for the 2 or % button of
another component, that signal will
be transmitted only after you select
that component.
• If you have assigned another
component to the TV or AMP button,
the volume of the TV or amplifier
cannot be controlled even when you
select other components.
Using Non-Preset
Remote Control
Operations
— Learning Function
To operate non-preset components
or functions, use the following
"learning" procedure to "teach"
any of the programmable buttons
on the Commander and labels on
the display to operate the
functions of another remote
control. You can also use the
learning function to change the
signal of individual labels and
buttons after setting the
component code number (page
13).
Note
Some specific remote control signals
may not be learned.
COMPO
SYSTEM
TIMER
SCROLL
SET
REC
VIDEO1
VIDEO2
TUNER
CD
MD
TV
1-
DVD
MENU
3
4
2,8
AUX
TAPE
PHONO
2-
GUIDE
PROGR
Continued
23
Advertisement
Table of Contents
