Preset programs for the SYSTEM
CONTROL A and C buttons
The SYSTEM CONTROL A and C
buttons are preset at the factory to
execute each programme as follows.
SYSTEM CONTROL A button:
Turn off all the Sony components that
could receive the signal from the
Commander at the same time.
SYSTEM CONTROL C button:
Turn on all the Sony components that
could receive the signal from the
Commander at the same time.
Programming a series of
commands to the SYSTEM
CONTROL buttons
2
TV
SAT
VCR
3
CD
MD
TAPE
4
PROGRAM
6
1
DVD
CBL
AMP
M1
M3
M2
Example: To programme the
procedure above to the SYSTEM
CONTROL B button
1
While pressing COMMANDER
OFF, press the MORE button.
The SYSTEM CONTROL keys (A – C)
and number keys (1 – 9) flash while
the preset buttons stay lit.
2
Select the system number by
pressing the SYSTEM CONTROL
button (in this case, SYSTEM
CONTROL B) or the number key.
All the component names flash.
Continued
GB
23