Programming A Series Of Commands To On The Component Select Buttons - Sony RM-VL710 Operating Instructions Manual

Programming a series
of commands to on
the Component
Select buttons
As with the SYSTEM CONTROL
buttons, you can also program a
series of operating commands for
the Component Select buttons (up
to 16 steps).
To execute the commands
programmed on a Component
Select button by the System
Control function, press the button
for more than 2 seconds.
SET
TV VCR CBL DVD
1 2
4 5
7 8
0
Notes
• When you press the button for less
than 2 seconds, it works as the
normal Component Select button,
and the programmed Function
function does not work.
• See also "Tips for programming the
System Control functions" on page
28.
1,3
POWER
AMP
3
6
9
ENT
2
Example: To program the
procedure on page 26 for the
VCR Component Select button
1
Press and while holding
SET, press the VCR
Component Select button.
The SET indicator and the VCR
Component Select button lights
turn on.
SET
TV VCR
If a Control Program function
(Component Macro) has
already set on the button, the
button flashes twice. The
setting procedure is
automatically canceled.
2
Set the Control Program
function.
With this example, press the
buttons in sequence as below:
VCR
You can program up to 16
consecutive steps to on each of
the Component Select buttons,
including the initial step of
pressing a including the first
step to select a Component
Select button.
3
Press SET to complete the
programming.
The VCR Component Select
button light turns off.
CBL DVD
POWER
1
POWER
Continued
AMP
AMP
29