Adjusting The Speaker Levels (Test Tone); Selecting The Calibration Type - Sony STR-DH520 Operating Instructions Manual

Selecting the calibration type

You can select the calibration type you want
and then perform the Auto Calibration.
1
Press AMP MENU.
2
Press V/v repeatedly to select
"A. CAL", then press
3
Press V/v repeatedly to select
"CUSTOM", then press
4
Press V/v repeatedly to select
the calibration type you want,
then press
• FULL.FLAT
Makes the measurement of frequency
from each speaker flat.
• ENGINEER
Sets to "the Sony listening room
standard" frequency characteristics.
• FRONT.REF
Adjusts the characteristics of all the
speakers to match the characteristics of
the front speaker.
• OFF
Sets the Auto Calibration equalizer
level to off.
The Auto Calibration starts
automatically.
5
Save the measurement result
(page 33).
or b.
or b.
.
Adjusting the speaker
levels
(TEST TONE)
You can adjust the speaker levels while
listening to the test tone from your seating
position.
,
V/v/B/b
MASTER
VOL +/–/
2
+/–
1
Press AMP MENU.
2
Press V/v repeatedly to select
"LEVEL", then press
3
Press V/v repeatedly to select
"T. TONE", then press
Input
buttons
AMP
MENU
or b.
.
continued
GB
35