Tuner Operations; Listening To Fm/Am Radio - Sony STR-DH520 Operating Instructions Manual

Tuner Operations

Listening to FM/AM radio

You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver (page
28).
Tip
The tuning scale for direct tuning is shown below.
Area
USA, Canada
Europe, Australia,
Taiwan
* The AM tuning scale can be changed (page 40).
TUNER
,
V/v/B/b
TUNING
+/–
FM AM
100 kHz 10 kHz*
50 kHz 9 kHz
Numeric
buttons
AMP
MENU
D.TUNING
SHIFT
Tuning to a station
automatically (Automatic
Tuning)
1
Press TUNER repeatedly to
select the FM or AM band.
2
Press TUNING + or TUNING –.
TUNING + scans from lower to higher
frequency stations and TUNING – for
scanning higher to lower.
The receiver stops scanning whenever a
frequency is received.
Using the control buttons on
the receiver
1
Turn INPUT SELECTOR to select the FM
or AM band.
2
Press TUNING MODE repeatedly to select
"AUTO".
3
Press TUNING + or TUNING –.
In case of poor FM stereo
reception
If the FM stereo reception is poor and "ST"
flashes on the display panel, select monaural
audio to lessen the sound distortion.
1
Press AMP MENU.
2
Press V/v repeatedly to select "TUNER",
then press or b.
3
Press V/v repeatedly to select "FM
MODE", then press
4
Press V/v repeatedly to select "MONO",
then press .
To return to stereo mode, repeat steps 1 to 4
and select "STEREO" in step 4.
or b.
GB
39