Transporting The Tractor And Implement - Alamo BUSH HOG XLRRX Series Operator's Manual

11. TRANSPORTING THE TRACTOR AND IMPLEMENT

Inherent hazards of operating the tractor and implement and the possibility of accidents are not left behind
when you finish working in an area. Therefore, the operator must employ good judgement and safe operation
practices when transporting the tractor and implement between locations. By using good judgement and
following safe transport procedures, the possibility of accidents while moving between locations can be
substantially minimized. OPS-U- 0017
Before transporting the tractor and implement, idle
the tractor engine, disengage the PTO and wait for
all moving parts to come to a complete stop. Once
all implement parts are completely stopped, raise
the implement to transport height. OPS-RK-0011
Before transporting the tractor on a public roadway
or boarding a trailer for transport, the tractor brake
pedals should be locked together.
pedals ensures that
simultaneously while stopping, especially when
making an emergency stop.
Use extreme caution and avoid hard applications of
the tractor brakes when towing heavy loads at road
speeds. Never tow the implement at speeds
greater than 20 MPH (32 kph). OPS-U- 0018
XLRRX 06/18
© 2018 Alamo Group Inc.
OPERATION
Locking the
both wheels brake
Operation Section 4-27