Power Supply Connector - Alamo BUSH HOG XLRRX Series Operator's Manual

The LED light will be damaged if the connections of the cables at the terminals of the
connector are accidentally reversed.
if the LED light on the solenoid connector does not turn on:
1. Check that there is power at the tractor plug.
2. Check that the fuse is good.
3. Make sure that the LED light is not damaged.

6.4 Power Supply Connector

The power supply connector of the tractor may vary
depending on th model and country of origin. The
standard supplied is the 7-pin plug according to ISO
1185 as shown in diagram. Plug is available on
request for 3-pin socket DIN 9680.
The replacement of the plug is possible by making
attention to the arrangement of the electrical
polarity.
NOTE: The solenoid connector (Ops-2386) will be
damaged if the connections of the cables are
accidentally reversed (See Ops-2387).
XLRRX 06/18
© 2018 Alamo Group Inc.
OPERATION
Operation Section 4-10