Sony MXD-D400 Operating Instructions (primary manual) Operating Instructions Manual page 33

2
Perform the following procedure
depending on what you want to label:
To label a track
Press . or > repeatedly until the
desired track number appears, then press
NAME EDIT/SELECT.
To label an MD
Press NAME EDIT/SELECT while the
total number of tracks (or groups when the
Group Function is on) is displayed.
To label a group
Press GROUP ON/OFF repeatedly until
"GROUP ON" appears, then press
ALBUM/GROUP – or + repeatedly until
the desired group appears. Press NAME
EDIT/SELECT while the total number of
tracks within the desired group is displayed.
The cursor starts flashing.
3
Press NAME EDIT/SELECT to select
the desired type of character.
Character type
Alphabet (upper cases)/
blank space/symbols
Alphabet (lower cases)/
blank space/symbols
Numbers
4
Enter a character.
Character type Do this
Alphabet Press the corresponding
letter button (or . or
>) repeatedly until the
character to be entered
flashes, then press M.
Numbers Press the corresponding
number buttons.
Blank space Press 10/0.
´ – / , . ( ) : ! ? Press 1 repeatedly.
Press 1, then press . or
& + < > _ = " ; # $
% @ ` > repeatedly.
5
Repeat steps 3 and 4 to enter the rest of
the name.
Select
Selected AB
Selected ab
Selected 12
6
Press YES.
To change the character
In step 3 or 4, press m or
the character to be changed flashes, press
CLEAR to erase the character, then repeat steps
3 and 4.
To add a character
After steps 1 and 2, press m or
cursor comes to the point you want to add a
character, then proceed to step 3.
Labering using the buttons on the
deck
1
Press MENU/NO repeatedly until "Edit
Menu" appears.
2
Turn AMS until "Nm In?" appears in the
display and press AMS.
3
Turn AMS to select "Disc" to label an MD, or
to specify the track or group to label.
While recording, go to step 5.
4
Press AMS or YES.
A flashing cursor appears in the display.
The deck starts playing and you can name a
track while monitoring the sound.
5
Press TIME to change the type.
Character type
Alphabet (upper cases)
Alphabet (lower cases)
Numbers
Symbols
6
Turn AMS to select the character.
The selected character flashes.
Letters, numbers, symbols, and a space
appear in sequential order as you turn AMS.
To enter a space, press AMS while the
cursor is flashing. (You cannot select a
space for the first character to the title.)
7
Press AMS to enter the select character.
The selected character stops flashing and
the cursor flashes waiting for the input of the
next character.
8
Repeat steps 6 and 7 until you have entered
the entire title.
9
Press YES.
repeatedly until
M
until the
M
Select
"A"
"a"
"0"
" ´ "
continued
GB
33