Specifications - Sony MHC-VX5 Operating Instructions Manual

Specifications

Amplifier section
MHC-VX7:
The following measured at AC 120, 220, 240 V
50/60 Hz
DIN power output (rated) 130 + 130 watts
Continuous RMS power output (reference)
MHC-VX5/VX5J:
The following measured at AC 120, 220, 240 V
50/60 Hz
DIN power output (rated) 110 + 110 watts
Continuous RMS power output (reference)
(6 ohms at 1 kHz, DIN)
170 + 170 watts
(6 ohms at 1 kHz,
10% THD)
(8 ohms at 1 kHz, DIN)
140 + 140 watts
(8 ohms at 1 kHz,
10% THD)
Inputs
MD IN:
(phono jacks)
VIDEO (AUDIO) IN:
(phono jacks)
MIC 1/2 (phone jack):
Outputs
MD OUT (phono jacks):
VIDEO OUT (phono jack):max. output level
S-VIDEO OUT (4-pin/mini-DIN jack):
PHONES (stereo phone jack):
SPEAKER:
MHC-VX7:
MHC-VX5/VX5J:
SUPER WOOFER:
SURROUND SPEAKER (MHC-VX7 only):
VIDEO CD/CD player section
System
Laser
Laser output
Wavelength
Frequency response
Signal-to-noise ratio
Dynamic range
Video color system format
CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength
Output Level
voltage 450 mV,
impedance 47 kilohms
voltage 250 mV,
impedance 47 kilohms
sensitivity 1 mV,
impedance 10 kilohms
voltage 250 mV
impedance 1 kilohms
1Vp-p, unbalanced, Sync
negative, load impedance
75 ohms
Y: 1Vp-p, unbalanced,
Sync negative,
C: 0.286Vp-p,
load impedance 75 ohms
accepts headphones of 8
ohms or more
accepts impedance of 6 to
16 ohms
accepts impedance of 8 to
16 ohms
Voltage 1 V, impedance 1
kilohm
accepts impedance of
16 ohms
Compact disc and digital
audio and video system
Semiconductor laser
( =780nm)
Emission duration:
continuous
Max. 44.6 W*
*This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
780 – 790 nm
2 Hz – 20 kHz (±0.5 dB)
More than 90 dB
More than 90 dB
NTSC, PAL
660 nm
–18 dBm
continued
GB
59