Sony MHC-VX5 Operating Instructions Manual page 14

Playing a CD (continued)
To
Stop play
Pause
Select a track
Find a point in
a track
(Lock Search
function)
Select a CD
in stop mode
Play only the
CD you have
selected
Play all CDs
Remove the CD Press §.
Exchange other
CDs while
playing
Adjust the
volume
14 GB
Do this
Press p.
Press CD (P (P on the
remote). Press again to resume
play.
During play or pause, turn the
jog dial clockwise (to go
forward) or counterclockwise
(to go back) and release it
when you reach the desired
track. (Or press + (to go
forward) or = (to go back)
on the remote.)
Press ) or 0 during
playback.
Press CD (P to stop
searching at the desired point.
Press a DISC 1~3 button or
DISC SKIP/EX-CHANGE.
Press PLAY MODE
repeatedly until "1 DISC"
appears.
Press PLAY MODE repeatedly
until "ALL DISCS" appears.
Press DISC SKIP/
EX-CHANGE.
Turn VOLUME (or press VOL
+/– on the remote).
Tips
• Pressing CD (P when the power is off
automatically turns the power on and starts CD
playback if there is a CD in the tray (One Touch
Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing
CD (P or the DISC 1~3 buttons (Automatic
Source Selection).
• If there is no CD in the player, "CD NO DISC"
appears in the display.
• When a disc tray holding a CD is selected (or
playing), the DISC 1~3 button for that tray lights
green. When a disc tray holding a CD is not
selected, the DISC 1~3 button for that tray lights
orange. When all disc trays are empty, the DISC
1~3 buttons all light green.