Step 2: Setting The Time - Sony MHC-VX5 Operating Instructions Manual

Step 2: Setting the
time
You must set the time before using the timer
functions.
DISPLAY
1
1
Press CLOCK/TIMER SET.
The hour indication flashes.
2
Turn the jog dial to set the hour.
GB
8
2,4 3,5
3
Press ENTER/NEXT.
The minute indication flashes.
4
Turn the jog dial to set the minute.
5
Press ENTER/NEXT.
The clock starts working.
Tip
If you've made a mistake, start over from step 1.
To change the time
The previous explanation shows you how to
set the time while the power is off. To change
the time while the power is on, do the
following:
1 Press CLOCK/TIMER SET.
2 Turn the jog dial to select SET CLOCK.
3 Press ENTER/NEXT.
4 Perform steps 2 through 5 above.
Note
The clock settings are cancelled when you
disconnect the power cord or if a power failure
occurs.