Specifications - Sony MHC-RV2 Operating Instructions Manual

Precautions (continued)
Before placing a cassette in the tape
deck
Take up any slack in the tape. Otherwise the tape may
get entangled in the parts of the tape deck and become
damaged.
When using a tape longer than 90
minutes
The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding
frequently. The tape may get entangled in the tape
deck.
Cleaning the tape heads
Clean the tape heads after every 10 hours of use.
Be sure to clean the tape heads before you start an
important recording or after playing an old tape. Use
a separately sold dry-type or wet-type cleaning
cassette. For details, refer to the instructions of the
cleaning cassette.
Demagnetizing the tape heads
Demagnetize the tape heads and the metal parts that
have contact with the tape every 20 to 30 hours of use
with a separately sold demagnetizing cassette. For
details, refer to the instructions of the demagnetizing
cassette.
GB
38

Specifications

Amplifier section
The following measured at AC 120, 127, 220, 240 V
50/60 Hz
DIN power output (rated) 50 + 50 watts
Continuous RMS power output (reference)
Inputs
GAME INPUT (VIDEO) (phono jack):
GAME INPUT (AUDIO) (phono jacks):
MIC (phone jack):
Outputs
VIDEO OUT (phono jack):
PHONES (stereo mini jack):
SPEAKER:
(6 ohms at 1 kHz, DIN)
60 + 60 watts
(6 ohms at 1 kHz, 10%
THD)
1Vp-p, 75 ohms
voltage 250 mV,
impedance 47 kilohms
sensitivity 1 mV,
impedance 10 kilohms
max. output level
1Vp-p, unbalanced, Sync
negative, load impedance
75 ohms
accepts headphones of
8 ohms or more
accepts impedance of 6 to
16 ohms