Recording To A Tape - Cd Synchro; Recording/Recording Manually - Sony MHC-RV2 Operating Instructions Manual

Recording to a tape
— CD Synchro Recording/Recording Manually
You can record from a disc, tape (or connected components) or radio. You can use TYPE I (normal)
tapes. The recording level is adjusted automatically.
Steps Recording from a disc
(CD Synchro Recording)
1
Load a recordable tape into deck B.
2
Press CD.
3
Load the disc you want to record.
4
Press CD SYNC.
Deck B stands by for recording.
"REC" flashes.
5
Press REC PAUSE/START.
Recording starts.
To stop recording
Press x.
Tip
For recording from the radio:
If noise is heard while recording from the radio, move
the respective antenna to reduce the noise.
Recording from a disc/tape/radio
manually
Press CD, TAPE A/B or TUNER/BAND.
Load the disc or tape (or other audio
source), or tune in the station you want
to record.
Press REC PAUSE/START.
Press REC PAUSE/START, and then start
playing the desired source to record.
Note
You cannot listen to other sources while recording.
GB
23