Inserting Two Size Aa (R6) Batteries Into The Remote; Setting The Clock - Sony MHC-GX8000/RG77 Operating Instructions Manual

Inserting two size AA (R6)
batteries into the remote
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.

Setting the clock

1
Turn on the system.
2
Press CLOCK/TIMER SET on the
remote.
When you set the time for the first time,
proceed to step 5.
3
Press V or v repeatedly to select
CLOCK SET.
4
Press ENTER.
5
Press V or v repeatedly to set the hour.
6
Press ENTER.
7
Press V or v repeatedly to set the
minute.
8
Press ENTER.
The clock starts functioning.
Tip
If you have made a mistake or want to change the
time, start over from step 2.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
GB
8
AA (R6)
batteries
e
E
E
e
MHC-RG77 4-238-409-13 (1)