Listening To Audio From A Connected Component; Recording Audio Signal From A Connected Component - Sony MHC-GNV111D Operating Instructions Manual

Listening to audio from a
connected component
Listening to a connected TV
or satellite tuner
Use buttons on the unit for the operation.
1
Connect the audio cords.
See "Hooking up optional components" on
page 85.
2
Press TV/SAT.
To switch between the "TV" and
"SAT" function
Hold down TV/SAT and press ?/1 while the
system is turned on. Release ?/1 first, then
release TV/SAT. The system switches the
function from "TV" to "SAT" or vice versa.
Note
If the sound is distorted or too loud when "TV" is
selected, change the function to "SAT".
Listening to a connected VCR
1
Connect the audio and video cords.
See "Hooking up optional components" on
page 85.
2
Press VIDEO on the unit.
Start playing the connected VCR.
Note
The video signal from the connected VCR only output
through the VIDEO OUT jack of this unit.
Tip
You can press FUNCTION +/– repeatedly to select
"TV", "SAT" or "VIDEO".
Recording audio signal
from a connected
component
1
Connect the audio cords.
See "Hooking up optional components" on
page 85.
2
Start recording manually.
See "Recording on a tape manually" on
page 64.
87 GB