Tape - Playback; Loading A Tape; Playing A Tape - Sony MHC-GNV111D Operating Instructions Manual

Tape – Playback

Loading a tape

1
b
Push (Z A) or
according to its direction to open the
selected deck.
2
Load a tape into Deck A or B.
With the side
you want to
play back or
record facing
forward
3
Push the center of the tape lid to close
the deck.
GB
62
B
(B Z) on the unit

Playing a tape

You can use TYPE I (normal) tape.
1
Load a tape.
2
Press FUNCTION +/– (or TAPE A/B on
the unit) repeatedly to select "TAPE A"
or "TAPE B".
3
Press DIRECTION on the unit
repeatedly to select "g" to play back
one side, "j"
sides or "RELAY"
back both decks in succession.
4
Press H (or nN on the unit).
The tape starts playing.
Press H (or nN on the unit) again to
play back the reverse side.
1)
The playback stops automatically after
repeating the sequence five times.
2)
Relay Play follows this cyclic sequence up to
five times, then stops:
Deck A (front side) t Deck A (reverse side)
t Deck B (front side) t Deck B (reverse
side)
1)
to play back both
2)
(Relay Play) to play
Reverse
Front side
side
indicator
indicator
Tape presence indicator