Table of Contents
Advertisement
Range Hood Care
Cleanin
IMPORTANT: Clean the hood and grease filters frequently
according to the following instructions. Replace baffle filters before
operating the hood.
Exterior surfaces:
•
To avoid damage to the exterior surface, do not use steel wool or
soap-filled scouring pads.
•
Always wipe dry to avoid water marks.
Cleaning method:
•
Liquid detergent soap and water or all-purpose cleanser.
•
Wipe with damp soft cloth or nonabrasive sponge, and then rinse with
clean water and wipe dry.
•
Do not use cleaning agents containing bleach
Stainless steel baffle filter:
1. Remove the filter by pulling the spring release handle, and then
pulling down the filter.
A. Spring release handle
2. Wash the stainless steel baffle filter as needed in a dishwasher or hot
detergent solution.
3. To reinstall the filter, first make sure the spring release handle is
toward the front. Insert the stainless steel filter into the upper track.
4. Push in the spring release handle.
5. Push up on the stainless steel filter, and then release the handle to
latch it into place.
WARNING
When removing the filter, please hold it with both hands to make sure it
does not fall.
Replacing the LED lamps
The LED lights are replaceable by a service technician only.
See the support contact information in the Warranty section.
A
English
13
Hide quick links:
Advertisement
Table of Contents
