Installing The Range Hood - Samsung NK36CB700W Series Installation & User Manual

DG68-01416B-02_IB(FULL)_NK30CB700W33AA.indb 13 DG68-01416B-02_IB(FULL)_NK30CB700W33AA.indb 13
7. Remove the cover by loosening the
screw on the PCB cover.
8. Connect the connector of the electric
damper wire and the PCB connector.
NOTE
Insert the wire into the hole at the top
left corner.
9. Assemble the PCB cover using a
screw.
NOTE
Put the connected connector into the
hole of the cover as shown in the
picture.

Installing the Range Hood

10. Fix the hood to the hood mounting
bracket installed on the wall.
11. Fix the duct auxiliary bracket using
two 30 mm screw anchors in the top
left of the duct.
English 13
2023-05-30 오전 11:18:50 2023-05-30 오전 11:18:50