Sony LBT-LV100AV Operating Instructions Manual page 6

Step 1: Hooking up the system
(continued)
If your TV automatically changes the
color system according to the input
signal:
The factory setting (AUTO) automatically
changes the color system of the video output
according to the color system of the current
VIDEO CD.
If the color system of your TV is NTSC:
Set SYSTEM SELECT to NTSC.
Pictures recorded in the PAL color system will be
stretched vertically and will be displayed with the
upper and lower parts of the picture cut off.
If the color system of your TV is PAL:
Set SYSTEM SELECT to PAL.
Pictures recorded in the NTSC color system will be
stretched horizontally and will be displayed with
the upper and lower parts of the screen masked in
black.
Notes
• Be sure to turn off the system before changing the
SYSTEM SELECT setting.
• Even if you change the color system using the
SYSTEM SELECT, the color system of the signal
input from the VIDEO1 and VIDEO2 INPUT jacks
does not change.
6
5
Connect the power cord to a wall
outlet.
The demonstration appears in the
display. When you press ?/1, the system
turns on and the demonstration
automatically stops.
To attach the center speaker feet
Attach the four center speaker feet (supplied)
to the bottom corners of the center speaker.
To connect optional AV
components
See page 52.
To deactivate the demonstration
When you set the time (See "Step 3 Setting
the time"), the demonstration is deactivated.
To activate/deactivate the demonstration
again, press DEMO (STAND BY) when the
system is off.