Connecting Outdoor Antennas - Sony LBT-LV100AV Operating Instructions Manual

When your DVD player has stereo
analog outputs
Be sure to match the color of the plugs and
the connectors. Connect the LINE OUT
(audio) output jack of your DVD player to the
FRONT jacks of DVD INPUT with the audio
connecting cable. To listen to the sound from
the connected DVD player, press DVD 5.1CH
repeatedly so the indicator above the button
goes off. At this moment, the DVD (for 2
channel) function is selected.
To the video output of
the DVD player
Notes
• Each time you press DVD 5.1CH, the function
changes as follows:
DVD 5.1CH y
(indicator on)
• You cannot enjoy the 5.1 channel surround sound
if you connect a DVD player which does not have
the 5.1 channel analog outputs.
To the front outputs
of the DVD player
DVD (2 channel)
(indicator off)
Connecting
outdoor antennas
Connect an outdoor antenna to improve the
reception. Refer to the instructions of each
component.
FM antenna
Connect an optional FM outdoor antenna.
You can also use the TV antenna instead.
75-ohm coaxial cable
(not supplied)
AM antenna
Connect a 6 to 15 meter (20 to 50 feet)
insulated wire to the AM antenna terminal.
Leave the supplied AM loop antenna
connected.
Insulated wire (not supplied)
Important
If you connect an outdoor antenna, connect a
ground wire to the U terminal with the screw
clamp. To prevent a gas explosion, do not
connect the ground wire to a gas pipe.
55