Playing Cds Without Interruption - Sony LBT-LX30 Operating Instructions Manual

To cancel Program Play
Press PLAY MODE repeatedly until
"PROGRAM," "ALL DISCS SHUFFLE," or
"1 DISC SHUFFLE" disappears from the
display.
To
Check the program
Clear the last selected
track
Clear a specific track
Add a track to the
program
Clear the entire
program
Tips
• The program you created remains in the CD
player's memory even after it has been played.
Press HX to play the same program again.
• If "--.--" appears instead of the total playing time
while programming, this means:
– you have programmed a track numbered over
20, or
– the total playing time has exceeded 100 minutes.
Press
CHECK on the remote
repeatedly. After the
last track, "CHECK
END" appears.
CLEAR on the remote
in stop mode.
CHECK on the remote
repeatedly until the
number of the track to
be cleared lights up,
then press CLEAR.
1 Press DISC SKIP to
select a CD.
2 Turn the jog dial to
select a track.
3 Press PLAY MODE.
x once in stop mode or
twice while playing.
Playing CDs
without
interruption
–– Non-Stop Play
You can play CDs without pausing between
tracks.
2
1
Press FUNCTION repeatedly until
"CD" appears in the display.
2
Press NON-STOP so the indicator
on this button lights up.
3
Press HX.
To cancel Non-Stop Play
Press NON-STOP so that the indicator on this
button goes off.
1
3
23