Playing A Tape - Sony LBT-LX10AV Operating Instructions Manual

Recording from the radio
(continued)
Tips
• When you want to record on the reverse side,
press h after pressing z REC in step 5 so that the
indicator on the h button (for the reverse side)
lights up green .
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• To record non-preset stations, select "MANUAL"
in step 2, then press TUNING +/– to tune in the
desired station.
• When you want to reduce the hiss noise in low-
level, high-frequency signals, press DOLBY NR
before step 7 so that "DOLBY NR B" appears in
the display.
• To record with the surround effect, press DSP
so that "SUR
The equalizer settings will not be recorded.
• To improve broadcast reception, move the
supplied antennas.
18
" appears in the display.

Playing a tape

You can play any type of tape, TYPE I
(normal), TYPE II (CrO
The deck automatically detects the tape type.
You can also use the AMS* functions to
quickly locate the desired songs.
To select either deck A or B, press DECK A
hH or DECK B hH on the remote.
* AMS: Automatic Music Sensor
? / 1
1
3
(Power)
2
DOLBY m
x
NR
M
), or TYPE IV (metal).
2
VOLUME
3
/ x X m /
M
DECK A hH
x
AMS
./>
m / M
DECK B hH
VOL +/–