Error Archive Tab - Siemens MOBIC T8 for Windows CE 3.0 Manual

Supplied Programs and Tools
Max. Trace File Size in KB (1...100)
Here, you set the maximum size of the trace archive. The trace archive always
contains the latest traces. Older entries are overwritten by new entries.
You can specify the maximum size of the trace file in Kbytes. The selectable range
is between 1 Kbyte and 100 Kbytes; the default is 10 Kbytes.
You can set the size of the trace file using the "UP" and "DOWN" arrow keys.
Default setting: 10
Application Trace Level
These settings only have significance when the global trace flag is activated (see
trace ON/OFF).
To set the program-dependent trace levels, select a program from the list and
assign one of the trace levels to it using the slider. The slider remains gray and
cannot be moved if the "Application Trace Level" list box is empty.
The trace levels are used by the programs as follows:
S No Trace Output
At this trace level, no trace is written.
S Important Trace
With this setting, only important trace output is made, for example message
received, function calls etc.
S Extended Trace
This level means extended trace output such as parameters of function calls
etc.
S Detailed Trace
At this trace level, all trace output that is possible is written.
All trace messages that either have the selected trace level or a trace level with
higher priority are written to the trace file.
Default setting: No trace output
7.2.3

Error Archive Tab

The Error Archive function is a tool to help development of new user programs
under Windows CE.
After tapping on the "Error Archive" tab, you display the user interface for
configuring the error archive (see Figure 7-7).
7-10
MOBIC T8 for Windows CE 3.0
C79000-G8976-C190-02