Table of Contents
Advertisement
C-1
OPTIONAL EQUIPMENT
• KP1505 Drive Roll and Wire Guide Kits
• KP1507 Drive Roll and Wire Guide Kits
The KP1507 series of drive roll kits contain a number
of components, in addition to the drive rolls, to opti-
mize the wire feeder for aluminum feeding. These
components are specifically designed to protect the
aluminum wire from abrasion and deformation, there-
by avoiding many common aluminum feeding prob-
lems.
• K1546 Conduit
ACCESSORIES
TABLE C.1 –
DRIVE ROLL AND GUIDE TUBE KITS
Wire Size
Solid Steel Electrode
0.023" - 0.025"
(0.6 mm)
0.030"
(0.8 mm)
0.035"
(0.9 mm)
0.040"
(1.0 mm)
0.045"
(1.2 mm)
0.052"
(1.4 mm)
1/16"
(1.6 mm)
5/64"
(2.0 mm)
3/32"
(2.4 mm)
Cored Electrode
0.030
(0.8 mm)
0.035"
(0.9 mm)
0.040"
(1.0 mm)
0.045"
(1.2 mm)
0.052"
(1.4 mm)
1/16"
(1.6 mm)
0.068"
(1.7 mm)
5/64"
(2.0 mm)
3/32"
(2.4 mm)
7/64"
(2.8mm)
Lincore Hard Facing
7/64"
(2.8mm)
.120"
(3.0mm)
Aluminum Electrode
0.035"
(0.9 mm)
0.040"
(1.0 mm)
3/64"
(1.2 mm)
1/16"
(1.6 mm)
3/32"
(2.2 mm)
POWER FEED 10 ROBOTIC
PLATFORM COMMONALITIES
• Power Feed 10 series Feed head.
• CGA gas connections.
• Works with all PowerWave ArcLink systems. "It is
not compatible with the PowerWave 350, 450 or 500
or Linc-net PowerWave 455's"
OPERATIONAL FEATURES AND CONTROLS
• All procedure settings for the Power Feed 10 Robotic
wire feeder is through software control. A DIP switch
is used to indicate hardware settings.
KP No. Series
KP1505 - 030S
KP1505 - 030S
KP1505 - 035S
KP1505 - 045S
KP1505 - 045S
KP1505 - 052S
KP1505 - 1/16S
KP1505-5/64
KP1505-3/32
KP1505 - 035C
KP1505 - 035C
KP1505 - 045C
KP1505 - 045C
KP1505 - 052C
KP1505 - 1/16C
KP1505 - 068
KP1505 - 5/64
KP1505 - 3/32
KP1505 - 7/64H
KP1505 - 7/64
KP1505 - 120
KP1507 - 035A
KP1507 - 040A
KP1507 - 3/64A
KP1507 - 1/16A
KP1507 - 3/32A
C-1
Advertisement
Table of Contents
