Section 1-General Guidelines; Operating Information - Invacare IVC Series Owner's Operator And Maintenance Manual

SECTION 1—GENERAL GUIDELINES
SECTION 1—GENERAL GUIDELINES
WARNING
SECTION 1 - GENERAL GUIDELINES contains important information for the safe
operation and use of this product.

Operating Information

DO NOT use near explosive gases.
Keep the product a minimum of 12" away from any direct heat source.
Close supervision is necessary when this product is used by or near children or people
with disabilities.
Check all parts for shipping damage and test before using. In case of damage, DO NOT
use. Contact a qualified technician for further instruction.
After any adjustments, repair or service and before use, make sure all attaching hardware
is tightened securely.
DO NOT let any individual underneath the bed or in between the raised bed frame
components at anytime.
When bed is not to be used for an extended period, unplug electric bed from the wall
outlet.
If a liquid is spilled in or around the electric bed, unplug the electric bed before cleaning.
Clean up the spill and allow the electric bed or the area around the electric bed to dry
thoroughly before using the electric controls again.
The manual/electric bed is NOT designed to be used as a patient transport. When
transporting a patient, use an approved patient transport. Otherwise, injury or damage
may result.
Body weight should be evenly distributed over the surface of the bed. DO NOT lay, sit or
lean in such a way that your entire body weight is placed only on raised head or foot
sections of the bed. This includes when assisting the user in repositioning or transferring
in or out of bed.
When operating/moving manual/electric beds, always ensure that the individual
utilizing the bed is positioned properly within the confines of the bed. DO NOT let any
extremities protrude over the side or between the bed rails when performing these
functions.
After the manual/electric bed has been assembled, always test to make sure that all
sections of the manual/electric bed are properly and securely in place before using.
Make sure head and foot springs/sections are connected securely to the universal bed
ends before use.
™ 8
IVC Bed Series Part No 1114836