Special Notes - Invacare IVC Series Owner's Operator And Maintenance Manual

Full electric beds, semi-electric beds, manual beds
Table of Contents

Advertisement

SPECIAL NOTES

Signal words are used in this manual and apply to hazards or unsafe practices which
could result in personal injury or property damage. Refer to the table below for
definitions of the signal words.
SIGNAL WORD
DANGER
WARNING
CAUTION
THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO
CHANGE WITHOUT NOTICE.
Pendant Operation
A safety feature of this product includes protection against overheating caused by
excessive or extended periods of operation. Depending on the duration, this
includes multiple or repeated adjustments or the use of multiple functions at one
time. To assure trouble free operation, ALWAYS allow a slight pause between
multiple adjustments and avoid pressing more than one function button at a time. If
thermal protection activation should occur, the bed will not respond to pendant
commands. Given this situation, release the pendant button and allow the bed unit
to sit for several minutes. This will allow the protection function time to reset and
restore bed function. Depending on the severity of the initial overheating, this could
take up to 30 minutes.
On Full Electric beds, the Hi/Lo crank MUST be removed before the bed is used.
Failure to remove the crank may cause damage or personal injury.
IVC
Bed Series
SPECIAL NOTES
Danger indicates an imminently hazardous situation which,
if not avoided, will result in death or serious injury.
Warning indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
Caution indicates a potentially hazardous situation which, if
not avoided, may result in property damage.
NOTICE
WARNING
6
MEANING
Part No 1114836

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5410ivc5411ivc5311ivc5310ivc

Table of Contents