The Md Deck - Editing; Before You Start Editing - Sony CMT-J3MD Operating Instructions Manual

Monaural recording (continued)
2
Press MENU/NO on the remote in stop
mode.
3
Press . or > on the remote
repeatedly until "Setup ?" appears, then
press ENTER/YES on the remote.
4
Press . or > repeatedly until
"Stereo Rec" (or "Mono Rec") appears,
then press ENTER/YES.
5
Press . or > repeatedly until
"Mono Rec" appears, then press
ENTER/YES.
"MONO" lights up.
6
Press FUNCTION repeatedly to select
the desired sound source (e.g., TUNER)
to record.
7
Press z MD.
The MD deck stands by for recording.
8
Press MD HS .
Recording starts.
The sound source is heard as is (e.g., stereo
sound when recording a stereo broadcast)
from the speakers.
To stop recording
Press s.
To return to stereo recording
1 Press MENU/NO on the remote in stop mode.
2 Press . or > on the remote repeatedly
until "Setup ?" appears, then press ENTER/
YES on the remote.
3 Press . or > repeatedly until "Mono
Rec" appears, then press ENTER/YES.
4 Press . or > repeatedly until "Stereo
Rec" appears, then press ENTER/YES.
The system switches back to stereo recording,
and "MONO" lights off.
42
The MD Deck — Editing

Before you start editing

You can edit the recorded tracks on an MD. By
using the editing functions, you can create a new
sequence to the recorded MD.
Editing functions
• Name — Labelling MDs (page 43)
Use this function to label discs and tracks. You
can use upper case, lower case, numbers, and
symbols for the titles.
• Erase — Erasing recordings (page 45)
Use this function to erase a single track one by
one, all the tracks at once, or a portion of a
track.
• Move — Changing the order of tracks
(page 48)
Use this function to change the track
numbering.
• Divide — Adding track numbers
(page 49)
Use this function to add track numbers. This
lets you locate your favourite phrases quickly.
• Combine — Combining recorded tracks
(page 50)
By using this function, two tracks are combined
to a single track. You can combine the tracks
which are not numerically consecutive, i.e. the
track 1 and track 4, etc.
• Undo — Cancelling the last edit
(page 52)
Use this function to cancel the last edit and
restore the contents of the MD to the condition
before the edit.